CAART5.5-10DG

Ring Terminal 10MM Stud Yellow DG

The comprehensive range of pre-insulated terminals is continually being developed as switchgear, contactors, terminal blocks etc. evolve.

Pre-insulated Terminal Features
• High quality product meeting International Standards
• Funnel entry terminals allow easy conductor entry, minimising substandard crimps
• Long term electrical integrity
• Voltage rating 300V
• Full technical back up including QA
• Conforms to AS 3169 and AS4437

Note: All terminals should be crimped onto the conductor with a quality crimper that is designed to crimp the specific terminal type.

Technical Data


Conductive Material 	(Quick Connect Range)	Brass 30% Zinc, 70% Copper	Tensile Strength 580 MPa	Ductile Rating 6% min	Final Metal State Annealed	Working Temperature	Pre-Insulate -40°C to +105°C	Brass 145°C	Tin plated 160°C

Conductive Material 	(Except Quick Connect Range)	Copper 99.9% Pure	Tensile Strength 200 MPa	Ductile Rating 35% min	Final Metal State Fully Annealed	Oxygen Content 50ppm max	General Electrical Properties	Total Conductivity 99.5% IACS	Total Resistivity 1.738 micro-ohm cm	

Electroplating	Material Tin	Tin Content 99.9%	Other Metals Lead + Antimony	Plating Thickness 2.5 microns		Insulation	Material PVC for all except nylon 6 or nylon 66 for FIQC	Breakdown Voltage 1.5kV (min)	Insulation Resistance Above 100 meg ohms	Working Voltage Up to 300V AC/DC	Conformant Standards	AS4437, AS3169 Australia	CSA Canada	IEC Europe	UL Nema USA	Demko Denmark	DIN VDE Germany	Kema Holland	JIS Japan; Nemko Norway	ASE Switzerland	BS United Kingdom