• Photoelectric sensing technology
  • 240VAC with sealed rechargeable lithium back-up battery designed to last for 10 years
  • Never need to change the battery for the life of the smoke alarm
  • Quick-Slide base compatible with Series 1 models (LIF5000, LIF5800 and LIF5800RL)
  • Increased resilience to electrical interferences
  • First to alarm memory feature
  • Low battery warning delay – silence low battery beeping for 8 hours, giving you time to change the smoke alarm
  • Smoke chamber monitoring
  • Up to 24 units can be interconnected together
  • Compatible with the LIFWMB2 wireless interlink base (must be installed by licensed electrician)
  • Insect screen over smoke sensing chamber to reduce nuisance alarms
  • Australian design & patented
  • Approved to AS3786:2014
  • ActivFire & SAI Listed
  • Must be installed by a licensed electrician


TEST MODE: Pressing and holding the TEST button will test the smoke alarm electronics and sounder. Releasing the TEST button the smoke alarm will enter hush mode.

LOW BATTERY CONDITION: The smoke alarm will beep every 40 seconds and the red LED will flash every 5 minutes when a low battery voltage is detected. Pressing the HUSH button during a low battery warning will silence the low battery beeping for up to 8 hours. This is called LOW BATTERY HUSH.

SMOKE ALARM MEMORY: The red LED will flash 3 times every 40 seconds on the unit that has activated. Pressing the TEST button will emit short beeping before resetting.

CHAMBER FAULT MODE: The smoke alarm continuously monitors the condition of its smoke detection chamber. Smoke alarm will beep 3 times every 40 seconds if it requires maintenance and cleaning.





Brand PSA

Be The First To Review This Product!

Help other Herkes Electrical Supplies Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category