LSCAPS12/10T

APS 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet. 
Screw terminals on rear panel for power and load connections.

APS 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet. 
12 x Australian GPO output connectors

APS is capable of the following:

• Automatic power On/Off of circuits when DMX is detected;
• Combined MCB and RCD (RCBO) breakers - circuit breaker with earth leakage protection (RCD/GFI) for each circuit;
• RCBO breaker also provides Neutral Disconnect function.
• Staggered power up of outputs to prevent overloading of the supply feed breakers (cascading of multiple units is also possible);
• Control via DMX512 - presence detected turns outputs on and loss of DMX turns outputs off after a preset time delay eg. 19 minutes;
• Control via GPI contact closure;
• Control via RDM;
• Cascading startup for individual units via XLR5 cabling and/or based on unit number;
• Manual override via front panel;
• 10A, 16A & 25A variants;
• Operation on any mains voltage in the range of 100-240V per phase.
• Monitoring of input voltages (3-phase), frequency and currents;
• Programmable overvoltage and undervoltage trips to protect loads;
• Voltage and current reporting via RDM;
• Three phase operation;
• Single phase operation possible but input current must be limited to 63A in total;

Being a power control and distribution unit, the APS is equally at home in a variety of applications including (but certainly not limited to):

• Moving Lights;
• LED fixtures;
• Video walls;
• Audio Systems;
• Stall power for Markets and Fairgrounds;

The APS is also ideal for permanent installations such as schools, churches, public halls and other venues where Energy Management is a key goal. By using APS modules to power all the lighting and video system, all the LED fixtures, video screens and moving lights will automatically be powered off a few minutes after the lighting console is turned off. When the console is next turned on, the lighting and video equipment will be sequentially powered up over a few seconds, without any user intervention, a truly Green solution.